Doosan G30E-5 gas forklift for sale by auction
Gießen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,800
≈ $2,066
Germany, Karlstein
€3,000
≈ $3,443
Germany, Giessen
€5,000
≈ $5,739
Germany, Giessen
€4,000
≈ $4,591
Germany, Frechen
€750
≈ $860.80
Germany, Giessen
€2,000
≈ $2,296
Germany, Giessen
€1,100
≈ $1,263
Germany, Giessen
€1,500
≈ $1,722
Germany, Trier
€2,250
≈ $2,583
4,500 kg
Germany, Haiger
€1,850
≈ $2,123
Germany, Giessen
€750
≈ $860.80
Germany, Giessen
€2,700
≈ $3,099
Germany, Karlstein
Gas forklift parts
Free Lift: 152 mm
Turning radius: 2,365 mm
Wheelbase: 1,700 mm
Track width front/rear: 982 mm / 1,000 mm
Ground clearance (under the mast): 105 mm
Engine: Mitsubishi G424I(E)
Power: 48.7 kW at 2,600 rpm
Torque: 186 Nm at 1,900 rpm
Transmission: Automatic, 1 forward/1 reverse
Forks: 1,050 mm length × 125 mm width × 45 mm thickness
Fork Carriage: ISO Class III
Mast inclination (forward/backward): 6° / 10°
Freihub: 152 mm
Wenderadius: 2.365 mm
Radstand: 1.700 mm
Spurweite vorne/hinten: 982 mm / 1.000 mm
Bodenfreiheit (unter dem Mast): 105 mm
Motor: Mitsubishi G424I(E)
Leistung: 48,7 kW bei 2.600 U/min
Drehmoment: 186 Nm bei 1.900 U/min
Getriebe: Automatik, 1 Vorwärts-/1 Rückwärtsgang
Gabeln: 1.050 mm Länge × 125 mm Breite × 45 mm Dicke
Gabelträger: ISO-Klasse III
Mastneigung (vor/zurück): 6° / 10°
Freihub: 152 mm
Wenderadius: 2.365 mm
Spurweite vorne/hinten: 982 mm / 1.000 mm
Bodenfreiheit (unter dem Mast): 105 mm
Drehmoment: 186 Nm bei 1.900 U/min
Getriebe: Automatik, 1 Vorwärts-/1 Rückwärtsgang
Gabeln: 1.050 mm Länge × 125 mm Breite × 45 mm Dicke
Gabelträger: ISO-Klasse III
Mastneigung (vor/zurück): 6° / 10°
Vorbereitet für Straßenzulassung
en carretera
Elevación libre: 152 mm
Radio de giro: 2.365 mm
Distancia entre ejes: 1.700 mm
Ancho de vía delantero/trasero: 982 mm / 1.000 mm
Distancia al suelo (bajo el mástil): 105 mm
Motor: Mitsubishi G424I(E)
Potencia: 48,7 kW a 2.600 rpm
Par motor: 186 Nm a 1.900 rpm
Transmisión: Automática, 1 adelante/1 atrás
Horquillas: 1.050 mm de largo × 125 mm de ancho × 45 mm de grosor
Carro de horquillas: ISO Clase III
Inclinación del mástil (adelante/atrás): 6° / 10°
varten
Vapaa nosto: 152 mm
Kääntösäde: 2 365 mm
Akseliväli: 1 700 mm
Raideleveys edessä/takana: 982 mm / 1 000 mm
Maavara (maston alla): 105 mm
Moottori: Mitsubishi G424I(E)
Teho: 48,7 kW nopeudella 2 600 rpm
Vääntömomentti: 186 Nm nopeudella 1 900 rpm
Vaihteisto: Automaattinen, 1 eteen/1 taaksepäin
Haarukat: pituus 1 050 mm × leveys 125 mm × paksuus
45 mm
Haarukkavaunu: ISO-luokka III
Maston kaltevuus (eteen/taakse): 6° / 10°
routière
Levée libre : 152 mm
Rayon de braquage : 2 365 mm
Empattement : 1 700 mm
Largeur de voie avant/arrière : 982 mm / 1 000 mm
Garde au sol (sous le mât) : 105 mm
Moteur : Mitsubishi G424I(E)
Puissance : 48,7 kW à 2 600 tr/min
Couple : 186 Nm à 1 900 tr/min
Transmission : Automatique, 1 marche avant/1 marche arrière
Fourches : 1 050 mm de longueur × 125 mm de largeur × 45 mm d’épaisseur
Tablier porte-fourche : Classe ISO III
Inclinaison du mât (avant/arrière) : 6° / 10°
stradale
Alzata libera: 152 mm
Raggio di sterzata: 2.365 mm
Interasse: 1.700 mm
Carreggiata anteriore/posteriore: 982 mm / 1.000 mm
Altezza libera dal suolo (sotto l'albero): 105 mm
Motore: Mitsubishi G424I(E)
Potenza: 48,7 kW a 2.600 giri/min
Coppia: 186 Nm a 1.900 giri/min
Trasmissione: Automatica, 1 avanti/1 retromarcia
Forche: 1.050 mm di lunghezza × 125 mm di larghezza × 45 mm di spessore
Piastra portaforche: ISO Classe III
Inclinazione dell'albero (avanti/indietro): 6° / 10°
op de weg
Vrije lift: 152 mm
Draaicirkel: 2.365 mm
Wielbasis: 1.700 mm
Spoorbreedte voor/achter: 982 mm / 1.000 mm
Bodemvrijheid (onder de mast): 105 mm
Motor: Mitsubishi G424I(E)
Vermogen: 48,7 kW bij 2.600 tpm
Koppel: 186 Nm bij 1.900 tpm
Transmissie: Automaat, 1 vooruit/1 achteruit
Vorken: 1.050 mm lengte × 125 mm breedte × 45 mm dikte
Vorkenbord: ISO klasse III
Helling van de mast (vooruit/achteruit): 6° / 10°
drogowej
Swobodny podnoszenie: 152 mm
Promień skrętu: 2 365 mm
Rozstaw osi: 1 700 mm
Rozstaw kół przód/tył: 982 mm / 1 000 mm
Prześwit (pod masztem): 105 mm
Silnik: Mitsubishi G424I(E)
Moc: 48,7 kW przy 2 600 obr./min
Moment obrotowy: 186 Nm przy 1 900 obr./min
Skrzynia biegów: automatyczna, 1 do przodu/1 do tyłu
Widły: długość 1 050 mm × szerokość 125 mm × grubość
45 mm
Wózek widłowy: Klasa ISO III
Nachylenie masztu (przód/tył): 6° / 10°
rutieră
Ridicare liberă: 152 mm
Raza de bratie: 2.365 mm
Ampatament: 1.700 mm
Lățimea ecartamentului față/spate: 982 mm / 1.000 mm
Garda la sol (sub catarg): 105 mm
Motor: Mitsubishi G424I(E)
Putere: 48,7 kW la 2.600 rpm
Cuplu: 186 Nm la 1.900 rpm
Transmisie: Automată, 1 înainte/1 înapoi
Furci: 1.050 mm lungime × 125 mm lățime × 45 mm grosime
Cărucior furcă: ISO clasa III
Înclinarea catargului (înainte/înapoi): 6° / 10°
Frilyft: 152 mm
Svängradie: 2 365 mm
Hjulbas: 1 700 mm
Spårvidd fram/bak: 982 mm / 1 000 mm
Markfrigång (under masten): 105 mm
Motor: Mitsubishi G424I(E)
Effekt: 48,7 kW vid 2 600 varv/min
Vridmoment: 186 Nm vid 1 900 varv/min
Kraftöverföring: Automatisk, 1 framåt/1 bakåt
Gafflar: 1 050 mm längd × 125 mm bredd × 45 mm tjocklek
Gaffelvagn: ISO klass III
Mastlutning (framåt/bakåt): 6° / 10°